30-Apr-2025
0401050201
Saya telah membaca dan memahami disclaimer di bawah, dan ingin mengunduh perangkat lunak yang ditunjuk.
This program is to upgrade your printer firmware.
Ver.16.00
- Fixed the failure where the correction value may not be reflected on the printed image when the correction unit of the cut length is set to [ Percent [%] ].
- Fixed the failure that causes cut length to be longer than the setting when selecting the length correction unit [ Percent [%] ] in print from the printer driver or in [ Compound page printing ] in MK Desktop Utility.
- Fixed the failure where printing cannot be stopped when the length correction unit [ Millimeter [mm] ] is set to "-3 mm or less" and cut length of label or plate is set to 2 mm when printing from the printer driver or from the MK Desktop Utility with "Compound page printing."
- Fixed the failure where two cut lines are printed under the following conditions when printing from the printer driver or with "Compound page printing" in MK Desktop Utility.
Conditions of the cut settings in the printer driver:
* Half Cut Setting: Off
* Cut Line Settings: Solid or Dotted
* Length Correction Units [ Percent [%] ] or [ Millimeter [mm] ] changed in positive direction
Ver.14.00
- Added [Percent [%]] as a cut length correction unit. Added the ability to toggle the cut length correction unit between [Percent [%]] and [millimeter [mm]]. Refer to the latest User's Guide for details.
- Added "inches" as a unit for media size.
- Increased the digits displayed for the number of cutter operations from 6 to 8.
- Improved the print media setting sequence. Now text data does not have to be entered before pressing the [Print] key to proceed to the setting screen.
- Changed the minimum cut length for labels from 4 mm to 2 mm.
Ver.13.00
- The version number has been changed for an administrative reason in the printer production. All features remain unchanged.
Ver.11.00
- Changed the instructions displayed when a "Feed error" occurs. Refer to the latest User's Guide for details.
Ver.10.02
- A menu has been added to improve the accuracy of cut length of the last piece of printed media:
[Settings] key > Others > Precise End Length: Off (default)/On
-Minimum cut length for Plate has been changed from 4 mm to 2 mm.
Current version of the printer driver and MK Desktop Utility do not support this specification change yet, the change becomes effective only at a standalone printing (without PC).
-Frequency of rare white line in the half cut printing has been reduced.
-Wrap Around Tape has been added to the product lineup of print media.
-Name of the setting menu "Print priority" to "Media Save Mode."
-Rewind amount of media has been optimized when using Label Tape or Wrap Around Tape and "Rewind movement" is set to "ON".
-A change has been made indicating a precautionary notification on the display when using 150m Ribbon Cassette (Black) or 85m Ribbon Cassette (White) for the Plate media as they may cause image failures on Plate.
-A change has been made indicating a dialog "Eject Canceled print media? Yes/No" when aborting print operation by opening the cover.
-A change has been made indicating a message "Close cover and press any key" when attempting to print with the cover open.
-Media end detection has been improved so that the printer does not detect "media end" mistakenly due to a curling of the print media, etc. in spite of presence of remaining media.
-Firmware update has become executable even in error status only when the error is [Print head position can't be Initialized.] Refer to the latest User's Guide for how to update the firmware with this case.
-Various adjustment values have become respectively registerable by media type and size while they have been only by media type. You are no longer forced to readjust a value each time the print media in use is changed to a different size.
-Intensity steps in Half Cut Motion have been changed from 2 steps to 6 steps.
-Detecting condition for remaining amount of Ink Ribbon has modified as the amount rarely has been indicated improperly.
Ver.03.00
・The label tape transport control was optimized.
・To make it easier to see when your PC or Bluetooth connection is complete and you're ready to print, we've changed the display.
・We have optimized the amount of rewinding when "do" the whole cutting of the nameplate and "have" the rewinding motion.
・Fixed a conversion error when converting "character placement setting conditions" set in Mk2600 to MK5000.
・Detection accuracy has been improved by changing the ink ribbon detection control.
Operating System:
Windows 11
Windows 10 (64-bit)
Hardware:
Computer on which the above operating system runs
Follow the below procedure to upgrade the printer firmware:
1. Click [DOWNLOAD] to download the firmware upgrading program (.exe file).
2. Open the folder where the downloaded .exe file resides. (Check the browser settings to find the save location.)
3. Double click the downloaded .exe to start the firmware upgrading program.
4. Follow the on screen instructions to complete the installation.
Semua perangkat lunak, program (termasuk namun tidak terbatas pada driver), file, dokumen, manual, instruksi, atau materi lainnya (secara bersama-sama disebut "Konten") tersedia di situs ini atas dasar "sebagaimana adanya".
Canon Singapore Pte. Ltd., dan perusahaan afiliasinya (“Canon”) tidak memberikan jaminan dalam bentuk apa pun sehubungan dengan Konten, secara tegas menyangkal semua jaminan, tersurat maupun tersirat (termasuk, tanpa batasan, jaminan tersirat tentang dapat diperjualbelikan, kesesuaian untuk tujuan tertentu dan non-pelanggaran) dan tidak bertanggung jawab untuk memperbarui, mengoreksi, atau memberikan dukungan Konten.
Canon memiliki semua hak milik, kepemilikan, dan hak kekayaan intelektual yang relevan dalam Konten. Anda dapat mengunduh dan menggunakan Konten hanya untuk penggunaan pribadi, non-komersial, dan dengan risiko Anda sendiri. Canon tidak bertanggung jawab atas kerusakan apa pun sehubungan dengan Konten, (termasuk, tidak terbatas untuk kerusakan tidak langsung, sebagian, ganti rugi atau kerusakan tidak disengaja).
Anda tidak boleh mendistribusikan, menetapkan, melisensikan, menjual, menyewakan, menyiarkan, mentransmisikan, menerbitkan, atau mentransfer Konten ke pihak lain mana pun. Anda juga tidak boleh (dan tidak akan membiarkan orang lain) mereproduksi, memodifikasi, memformat ulang, membongkar, mendekompilasi, atau merekayasa balik atau membuat karya turunan dari Konten, secara keseluruhan atau sebagian.
Anda setuju untuk tidak mengirim atau membawa Konten keluar dari negara/wilayah tempat Anda awalnya memperolehnya ke negara/wilayah lain tanpa izin yang diperlukan dari pemerintah yang berlaku dan/atau melanggar undang-undang, batasan, dan peraturan yang berlaku.
Dengan melanjutkan mengunduh Konten, Anda setuju untuk terikat oleh hal di atas serta semua hukum dan peraturan yang berlaku untuk pengunduhan dan penggunaan Konten oleh Anda.