Entering Characters
06-Sep-2011
8200333300
Solusi
Use the keys below to enter information in the machine.
You can enter the following characters in each input mode:
•Use 
– 
[numeric keys] to enter characters.
•Press – [numeric keys] repeatedly until the required character appears.
•Press
to enter symbols.
•Press
to switch between input modes:
[A]: Letter mode
[1]: Number mode
•Press [
] or [ 
] to move the cursor position.
•Press
[Clear] to delete the character at the cursor position. Hold [Clear] to delete the entire entry.
– [numeric keys] to enter characters.•Press
– [numeric keys] repeatedly until the required character appears.•Press
to enter symbols.•Press
to switch between input modes:[A]: Letter mode
[1]: Number mode
•Press [
] or [ ] to move the cursor position.•Press
[Clear] to delete the character at the cursor position. Hold [Clear] to delete the entire entry.For displays that require alphanumeric entries, follow the procedure below to enter characters.
Example: Enter <Canon>.
1. Press 
repeatedly until an uppercase <C> appears.
repeatedly until an uppercase <C> appears.
2. Press [ 
] to move the cursor to the right, then press until an <a> appears.
] to move the cursor to the right, then press until an <a> appears.
3. Press 
until an <n> appears.
until an <n> appears.
4. Press [ ] to move the cursor to the right, then press until an <o> appears.
] to move the cursor to the right, then press until an <o> appears.
5. Press [ ] to move the cursor to the right, then press until an <n> appears.
] to move the cursor to the right, then press until an <n> appears.