Calling from an Extension
06-Sep-2011
8200338300
Solusi
When calling an outside line from an extension, the outside line access number (such as 0) is normally dialed before the fax number of the destination. In the same manner, when the machine is connected to an extension, the outside line access number needs to be entered before fax numbers. You can also enter a pause time (i.e., the amount of time the machine waits after dialing the outside line access number when calling from an extension) together with these numbers. Enter fax numbers as described below when the machine is connected to an extension.
1. Place documents.
2. Press
[FAX].
3. Press
[R] to access the out side line.
4. Use
- 
[numeric keys] to enter the fax number.
5. Press
[Start].
When you place the documents on the platen glass, press [
] or [ 
] to select the document size, then press [Start] for each document. When scanning is complete, press [OK] to start sending.
2. Press
[FAX].3. Press
[R] to access the out side line.4. Use
- [numeric keys] to enter the fax number.5. Press
[Start].When you place the documents on the platen glass, press [
] or [ ] to select the document size, then press [Start] for each document. When scanning is complete, press [OK] to start sending.NOTE
If you use [R], 2-second pause will be applied between the machine dials the prefix number and fax number.
[R], 2-second pause will be applied between the machine dials the prefix number and fax number.