Isu
Image edges are blurred or white banding occurs
Sebab dan Solusi
<Cause1> The Platen suction is too strong.
<Corrective Action1>
In the Control Panel menu, reduce the level of [VacuumStrngth].
<Corrective Action2>
Close the blue Switch on the platen so that it matches the paper size.
<Cause2> Incorrect Printhead alignment value.
<Corrective Action1>
When printing fine lines or text at high precision on glossy or semi-glossy photo or proofing paper, set the optimal Printhead height before aligning the printhead.
<Corrective Action2>
In the Control Panel menu, set [Head Height] to a lower height.
<Cause3> The type of paper specified in the printer driver does not match the type loaded in the printer.
<Corrective Action1>
Load paper of the same type as you have specified in the printer driver.
<Corrective Action2>
Make sure the same type of paper is specified in the printer driver as you have loaded in the printer.
1. Press the [Stop] button and stop printing.
2. Change the type of paper in the printer driver and try printing again.