How to Register File Server Addresses (MF4680)
30-Jan-2012
8201430800
Solusi
1. Press [Additional Functions].
2. Press [Left cursor] or [Right cursor] to select [ADDRESS BOOK SET.], then press [OK].
3. Press [Left cursor] or [Right cursor] to select [1-TOUCH SPD DIAL] or [CODED SPD DIAL], then press [OK].
4. Press [Left cursor] or [Right cursor] to select a one-touch key (01 to 08) or coded dial code (000 to 191) for which you want to register the address, then press [OK].
You can also select a one-touch key or coded dial code by pressing the corresponding one-touch key, or [Coded Dial] followed by the desired three-digit code.
5. Press [Left cursor] or [Right cursor] to select select [SMB], then press [OK].
6. Press [Left cursor] or [Right cursor] to select select [HOST NAME], then press [OK].
7. Use the numeric keys to enter the name of the file server on the network (up to 120 characters), then press [OK].
8. Press [Left cursor] or [Right cursor] to select [NAME], then press [OK].
9. Use the numeric keys to enter the destination’s name (up to 16 characters), then press [OK].
10. Press [Left cursor] or [Right cursor] to select [FILE PATH], then press [OK].
11. Use the numeric keys to specify the folder to which the job is to be sent (up to 120characters), then press [OK].
12. Press [Left cursor] or [Right cursor] to select [LOGIN NAME], then press [OK].
13. Use the numeric keys to enter the login name, then press [OK].
You can enter up to 24 characters for the login name.
14. Press [Left cursor] or [Right cursor] to select [PASSWORD], then press [OK].
15. Use the numeric keys to enter the password, then press [OK].
You can enter up to 14 characters.
To register another one-touch key or coded dial code, repeat the procedure from step 4.
16. Press [Stop/Reset] to return to the standby mode.