Connecting an external microphone (XA25 / XA20)

Update Terakhir : 16-Mei-2013
Nomor isu : 8201874200

The procedure for connecting an external microphone is explained below.

For more information on settings, refer to the Related information.

To use the INPUT 1/INPUT 2 terminals,, infrared light, and tally lamp, attach the HDU-1 handle unit to the camcorder.

1. Use the supplied screws to attach the microphone holder unit to the handle unit (

).

2. (

) Align the handle unit with the handle attachment unit and then (

) slide the handle unit forward until it is in place.

NOTE

XA20: Make sure to turn the screws and remove the cover before using.

3.

Firmly tighten the front and rear screws with a coin or similar object.

1. Loosen the microphone lock screw (

), open the microphone holder and insert the microphone (

).

2. Tighten the lock screw (

) and put the microphone cable through the microphone cable clamp under the microphone holder (

).

3. Plug the microphone cable into the desired INPUT terminal or the MIC terminal (

).