Reacquiring Subjects Lost after Zooming (Framing Assist) (PowerShot SX510 HS)

Update Terakhir : 22-Agu-2013
Nomor isu : 8201896800

(Framing Assist) allows you to temporarily zoom out to find subjects lost when zooming in.

1. Turn the camera on.

2. Press and hold the <

> button.

The camera zooms out and displays a white frame around the area previously shown (before you pressed the <

> button).

3. Aim the camera so that the subject enters the white frame, and then release the <

> button.

The previous magnification is now restored, so that the area outlined in white fills the screen again.

IMPORTANT

Some shooting information is not displayed while the camera is zoomed out.
During movie shooting, the white frame is not displayed if you press the <> button. Also note that camera operating sounds such as zooming will be recorded.

NOTE

If you prefer to shoot at the zoom factor of the screen in step 2, press the shutter button all the way down.
You can adjust the zoom factor that the camera will revert to after Zoom Framing Assist (when you release the < > button) by moving the zoom lever as you hold the < > button to resize the white frame.
To adjust how much the camera zooms out when the < > button is pressed, press the <MENU > button and choose one of the three levels in [ Display Area] on the [ ] tab.
The zoom factor cannot be changed with the < > button after you press the shutter button all the way down in self-timer mode.