Reacquiring Subjects Lost after Zooming (Framing Assist) (PowerShot SX510 HS)
22-Aug-2013
8201896800
Solution
(Framing Assist) allows you to temporarily zoom out to find subjects lost when zooming in.
1. Turn the camera on.
2. Press and hold the <
> button.
> button.
The camera zooms out and displays a white frame around the area previously shown (before you pressed the <> button).
> button).
3. Aim the camera so that the subject enters the white frame, and then release the <> button.
> button.- The previous magnification is now restored, so that the area outlined in white fills the screen again.
IMPORTANT
- Some shooting information is not displayed while the camera is zoomed out.
- During movie shooting, the white frame is not displayed if you press the <> button. Also note that camera operating sounds such as zooming will be recorded.
NOTE
- If you prefer to shoot at the zoom factor of the screen in step 2, press the shutter button all the way down.
- You can adjust the zoom factor that the camera will revert to after Zoom Framing Assist (when you release the < > button) by moving the zoom lever as you hold the < > button to resize the white frame.
- To adjust how much the camera zooms out when the < > button is pressed, press the <MENU > button and choose one of the three levels in [ Display Area] on the [
] tab. - The zoom factor cannot be changed with the < > button after you press the shutter button all the way down in self-timer mode.