Choosing Subjects to Focus On (Tracking AF) (PowerShot SX60 HS)

Update Terakhir : 16-Sep-2014
Nomor isu : 8202165500

IMPORTANT

[Servo AF] is set to [On] and cannot be changed.
Tracking may not be possible when subjects are too small or move too rapidly, or when subject color or brightness matches that of the background too closely.
[AF-Point Zoom] on the [ ] tab of the MENU is not available.
In the following example procedure, the camera's shooting mode has been set to [Program AE] ().

For a list of shooting modes in which Tracking AF is possible, please refer to the table at the end of the page.

1. Press the <Power> button to turn the camera on.

2. Press the <

> button, choose [AF Frame] on the [Shooting] (

]) tab, and then choose the [Tracking AF].

Then, press the <

> button.

3. (

) is displayed in the center of the screen. Aim the camera so that (

) is on the desired subject, and then press the [AF frame selector] <

> button.

- When the subject is detected, the camera beeps and (

) is displayed. Even if the subject moves, the camera will continue to track the subject within a certain range.

- If no subject is detected, (

) is displayed.

REFERENCE

To cancel tracking, press the () [AF Frame Selector] <> button again.
The camera can detect subjects even if you press the shutter button halfway without pressing the < > button. After your shot, () is displayed in the center of the screen.
If [Face ID] is set to [On], names will not display when registered people are detected, but the names will be recorded in the still images. However, a name will display if the subject chosen to focus on is the same as a person detected with Face ID.

4. Press the shutter button halfway. (

) changes to a blue (

) which follows the subject as the camera continues to adjust the focus and exposure (Servo AF).