Dengan lanjut menggunakan situs ini, anda setuju dengan syarat penggunaan dan kebijakan privasi kami (termasuk penggunaan cookies di situs ini untuk pengalaman yang lebih baik).
Konsumen Bisnis
ENG BAHASA INDONESIA
Konsumen
Beralih ke: Bisnis
Dukungan
ENG BAHASA INDONESIA
  1. Dukungan
  2. Cari
  3. Unduh
Hubungi kami

Configuring the ISO Speed Settings (PowerShot SX720 HS)

21-Jan-2016
8202802800

Solusi

    Choosing a higher ISO speed will increase shutter speed and thus reduce subject and camera shake in dark environments, and allow you to shoot without the flash.
    IMPORTANT
    • The instructions in this section apply to a camera with the [Shooting Mode] set to [Program AE] ( ).
    Shooting Mode with Limited ISO Settings

    1. Press the [Power] button to turn the camera on.
    2. Press the [ ] button.

    3. Press the [ ], [ ] buttons to choose [ISO Speed] in the menu, and then press the [ ] or [ ] button.





    4. Press the [ ], [ ] buttons to choose the desired ISO speed.





    5. Press the [ ] button to complete the settings.
    The option you configured is displayed on the screen.


    NOTE
    • To view the automatically determined ISO speed when you have set the ISO speed to [AUTO], press the shutter button halfway.
    • Although choosing a lower ISO speed may reduce image graininess, there may be a greater risk of subject and camera shake in some shooting conditions.
    • Choosing a higher ISO speed will increase shutter speed, which may reduce subject and camera shake and increase the flash range to reach distant subjects; however, in this case, images will look grainy.
    ISO speed cannot be configured in the following shooting modes.
    ... Not configurable
    FunctionShooting mode
    ISO Speed
    AUTO
    80 / 100 / 200 / 400 / 800 / 1600 / 3200