17-Jan-2017
0200257702
I have read and understood the disclaimer below
and wish to download the designated software
(Optional)Quick Menu is a utility software that allows you to easily start the applications and manuals supplied with the printer, or quickly access online product information. In addition, install My Image Garden, and you can enjoy slide shows of images saved on a computer from Image Display.
[Ver.2.6.2]
- The supported models have been added.
- The title of [Quiet Settings] in [Device Settings & Maintenance] category set in some languages was changed.
[Ver.2.6.1]
- Change the supported OS. For details, refer to the OS information given in the contents.
- The supported models have been added.
[Ver.2.6.0]
- Windows 10 has been added as a supported OS.
- The supported models have been added.
[Ver.2.5.0]
- The supported models have been added.
- The [Start Easy-PhotoPrint EX] has been added to enable download and install the Easy-PhotoPrint EX.
When additionally install the Easy-PhotoPrint EX under the environment that the My Image Garden is installed, the Easy-PhotoPrint EX can be started from the Quick Menu.
[Ver.2.4.1]
- The supported models have been added.
- [Easy-PhotoPrint+] function has been added for Easy-PhotoPrint+ can be started from Quick Menu.
- [Printer Information] function has been added for Remote U.I. can be started from Quick Menu.
[Ver.2.3.0]
- The supported models have been added.
[Ver.2.2.2]
- The supported models have been added.
- The following problem has been rectified.
After Quick Menu is overwritten, sometimes it cannot be launched.
[Ver.2.2.1]
1.Windows 8.1 has been added as a supported OS.
2.ECO Information is added to show the "amount of paper saved" and "amount of CO2 reduced" information.
3.Inkjet Cloud Printing Center is added to link to the top page of Inkjet Cloud Printing Center.
Note) Inkjet Cloud Printing Center is added to link to the top page of Inkjet Cloud Printing Center.
4.To Photo Album Ordering Sites is added to link to the top page of the photoPICO web site.
Note) When "Country or Region" is set by Australia, this function is available.
5.The following problem has been rectified.
When the MG5500 series or the MG6400 series is specified in [ Select Model ], Inkjet Cloud Printing Center is not displayed in the menu.
6.The supported models have been added.
[Ver.2.1.0]
- The supported models have been added.
[Ver.2.0.0]
- The supported models have been added.
- Windows 8 has been added as a supported OS.
System Requirement
OS:
- Windows XP SP3 or later
System Utility
- .NET Framework
1.If Solution Menu EX has been installed, it is uninstalled first, and then Quick Menu is installed.
2.It might take a small amount of time to activate Quick Menu depending on the PC.
Download / Installation Procedures
1. Download the file. For the location where the file is saved, check the computer settings.
2. Double-click the downloaded EXE file to decompress it, then installation will start automatically.
Uninstall Procedures
If needed, you can uninstall this program using the Control Panel.
Note :
The steps below are for Windows 7. This procedure may be different for other OSes.
1. On the Start menu, click Control Panel, and then, under Programs click Uninstall a Program
2. A page will open with a list of installed programs. Double click on the program that you want to uninstall.
3. Click "Yes" then "OK", this will complete the uninstallation process.
All software, programs (including but not limited to drivers), files, documents, manuals, instructions or any other materials (collectively, “Content”) are made available on this site on an "as is" basis.
Canon Singapore Pte. Ltd., and its affiliate companies (“Canon”) make no guarantee of any kind with regard to the Content, expressly disclaims all warranties, expressed or implied (including, without limitation, implied warranties of merchantability, fitness for a particular purpose and non-infringement) and shall not be responsible for updating, correcting or supporting the Content.
Canon reserves all relevant title, ownership and intellectual property rights in the Content. You may download and use the Content solely for your personal, non-commercial use and at your own risks. Canon shall not be held liable for any damages whatsoever in connection with the Content, (including, without limitation, indirect, consequential, exemplary or incidental damages).
You shall not distribute, assign, license, sell, rent, broadcast, transmit, publish or transfer the Content to any other party. You shall also not (and shall not let others) reproduce, modify, reformat, disassemble, decompile or otherwise reverse engineer or create derivative works from the Content, in whole or in part.
You agree not to send or bring the Content out of the country/region where you originally obtained it to other countries/regions without any required authorization of the applicable governments and/or in violation of any laws, restrictions and regulations.
By proceeding to downloading the Content, you agree to be bound by the above as well as all laws and regulations applicable to your download and use of the Content.