23-Oct-2015
0400229202
I have read and understood the disclaimer below
and wish to download the designated software
Firmware Version 1.0.7.1.00 incorporates the following additions and improvements.
*EOS C500 only.
1. Enables control of CINE-SERVO lenses using the RC-V100 remote controller.
2. Enables peripheral illumination correction for the following lenses:
EF lenses:
EF 16-35mm f/4L IS USM
EF-S 10-18mm f/4-5.6 IS STM
EF 400mm f/4 DO IS II USM
EF 11-24mm f/4L USM
EF 24-105mm f/3.5-5.6 IS STM
EF 100-400mm f/4.5-5.6L IS II USM
EF-S 24mm f/2.8 STM
CINE-SERVO lens:
CN7x17 KAS S/E1
3. When one of the following EF lenses is attached and power is turned off, the lens automatically retracts to its minimum length:
EF 40mm f/2.8 STM
EF-S 24mm f/2.8 STM
EF 50mm f/1.8 STM
Firmware Version 1.0.7.1.00 is for cameras with Firmware Version 1.0.6.1.00 or earlier. If your camera's firmware is already version 1.0.7.1.00, it is not necessary to update the firmware. Once the camera is updated to the latest firmware version, it cannot be restored to a previous version.
For further details, please refer to the latest version of the instruction manual for this product, which will be released at the same time as this firmware update.
Preparations for the Firmware Update:
After the Firmware update has been performed, the camera's menu and custom picture settings will be reset. It is recommended that users save their menu and custom picture settings as settings data to an SD card, separate from the one that will be used to carry out the update, before starting update operations. This saved data can be loaded into the camera and the settings can be changed after the update has been completed. For further information on this, please refer to the section in the unit's Instruction Manual titled "Saving and Loading Camera Settings".
The downloaded folder contains the firmware (file name: VIG7.FIM / file size: 35,066,684 bytes), and instructions on the firmware update procedures (a PDF file in five languages: Japanese, English, French, Spanish and Simplified Chinese). Before starting the firmware update operations, please be sure to carefully confirm your understanding of these instructions.
The following things are required to perform this firmware update:
1. A Cinema EOS C500 or EOS C500 PL camera body
2. A computer (OS: Windows)
OS Requirements: Windows 10, Windows 8.1, Windows 8, Windows 7 SP1
3. A 64 MB or higher-capacity SD memory card or an SDHC memory card (both commercially available)
4. An SD card reader/writer (commercially available) or an SD card slot built into the computer
5. A fully charged battery pack for the camera
6. Compact power adapter bundled with the camera
7. The firmware (the downloaded file)
Q1: Please tell me about the changes made in Firmware Version 1.0.7.1.00.
A1:
1. Enables control of CINE-SERVO lenses using the "RC-100" remote controller. The focus, aperture and zoom can also be controlled. However, in order to operate a CINE-SERVO lens, an external battery/power source is required.
*It is necessary to update the firmware of the CINE-SERVO lens.
2. Enables peripheral illumination correction for one CINE-SERVO lens and seven EF lenses. Peripheral illumination correction corrects for insufficiencies in the amount of peripheral light caused by the optical properties of the lens.
3. When one of the following EF lenses is attached and power is turned off, the lens automatically retracts to its minimum length:
EF 40mm f/2.8 STM
EF-S 24mm f/2.8 STM
EF 50mm f/1.8 STM
In addition, by using Custom Function on the menu, it is now possible to select whether or not the lens will retract when the power is turned off.
Q2: How can I carry out a firmware update?
A2:
Please download the most recent firmware for this model from the Canon Web site and follow the procedure shown on the Web page to install it.
History
Changes in Firmware Version 1.0.6.1.00:
1. Shortens the duration until it is possible to start recording when a high-capacity CF card exceeding 128GB is used.
2. Enhances operability when setting the white balance through an improved user interface.
3. Supports the BT.2020 color gamut, which is being considered as the 4K broadcasting standard. (3G-SDI/MON. terminal output only. Recording to the main unit is not supported.)
Changes in Firmware Version 1.0.5.1.00:
- For EOS C500
1. Compatibility with the Canon RC-V100 Remote Controller has been added.
2. Peripheral illumination correction data has been added for the [CN-E35mm T1.5 L F] EF Cinema lens and the [EF-S 55-250mm f4-5.6 IS STM] EF lens.
3. Fixes a phenomenon in which the EF Cinema lens' F number was incorrectly displayed.
- For EOS C500 PL
1. Compatibility with the Canon RC-V100 Remote Controller has been added.
Changes in Firmware Version 1.0.4.1.00:
-EOS C500 Cinema EOS Camera & EOS C500 PL Cinema EOS Camera
1. When using the Magnify focus assist function, the ability to move the magnified viewing area around the LCD has been added.
2. Maximum ISO setting has been increased to ISO 80,000.
3. Cinema Gamut mode and DCI-P3+ mode have been added to provide expanded color gamut options in RAW capture.
4. 4096x1080-pixel RAW format resolution has been added.
5. A Key Lock menu setting has been added which now makes it possible to lock all operations, including the START/STOP button.
6. Using the optional Canon WFT-E6 Wireless File Transmitter, the camera's remote-control application allows up to two users to access the same unit via a Wi-Fi link providing simultaneous and independent control of camera operation and metadata input.
7. Canon Log LUT support has been made possible for HD/SD SDI terminal output.
8. ACESproxy output from monitor terminal has been added.
9. [ND+]/[ND-] have been added as functions that can be allocated to any assignable button.
-EOS C500 Digital Cinema Camera only
10. Ability to assign the two control dials (body and grip) to operate either Iris or ISO sensitivity independently has been added.
11. Peripheral Illumination Correction Data has been added for seven (7) Canon Cinema lenses (EF mount) and eleven (11) Canon EF Lenses.
Changes in Firmware Version 1.0.3.1.00:
1. By making the fan run during REC PAUSE, new specifications have been introduced that extend the length of time the fan stops running during recording. The unit was configured so that no message would appear to inform the user that the fan will start spinning; this was done in order to improve visibility. The user can check if the fan is spinning or not by referring to the conventional icon display.
2. Remote control of the WFT-E6 and Wi-Fi peripherals on an ad-hoc connection using iOS6/Safari has been made possible.
3. The phases of the GENLOCK Reference Signal and the 3G-SDI terminal/MON. terminal's output have been matched.
4. The polarity of the XLR terminal has been modified to improve compatibility with external audio devices. The pin configuration has been modified to be consistent with the description in the Instruction Manual. Before the Firmware update, the pin configuration for the XLR jack was (pin1: shield, pin2: cold, pin3: hot). After the Firmware update, the pin configuration for the XLR jack will be (pin1: shield, pin2: hot, pin3: cold). The XLR pin configuration meets the international AES standard recommendation. The firmware update will avoid the scenario where use of the unit in combination with a device of different polarity than the XLR terminals would result in reduced sound levels due to a reversal of the phase relationship.
All software, programs (including but not limited to drivers), files, documents, manuals, instructions or any other materials (collectively, “Content”) are made available on this site on an "as is" basis.
Canon Singapore Pte. Ltd., and its affiliate companies (“Canon”) make no guarantee of any kind with regard to the Content, expressly disclaims all warranties, expressed or implied (including, without limitation, implied warranties of merchantability, fitness for a particular purpose and non-infringement) and shall not be responsible for updating, correcting or supporting the Content.
Canon reserves all relevant title, ownership and intellectual property rights in the Content. You may download and use the Content solely for your personal, non-commercial use and at your own risks. Canon shall not be held liable for any damages whatsoever in connection with the Content, (including, without limitation, indirect, consequential, exemplary or incidental damages).
You shall not distribute, assign, license, sell, rent, broadcast, transmit, publish or transfer the Content to any other party. You shall also not (and shall not let others) reproduce, modify, reformat, disassemble, decompile or otherwise reverse engineer or create derivative works from the Content, in whole or in part.
You agree not to send or bring the Content out of the country/region where you originally obtained it to other countries/regions without any required authorization of the applicable governments and/or in violation of any laws, restrictions and regulations.
By proceeding to downloading the Content, you agree to be bound by the above as well as all laws and regulations applicable to your download and use of the Content.