Indonesia
Indonesia
29-Jul-2025
0401075802
I have read and understood the disclaimer below
and wish to download the designated software
Firmware Version 1.6.0 incorporates the following fixes and enhancements:
1. Adds support for the Canon Multi-Camera Control wireless remote application.
2. Adds support for NDI 6.
*NDI: An open standard for connecting video equipment over a network.
3. Enables setting HDMI / SDI output to 30fps or 24fps equivalent when the frame frequency is 59.94Hz.
4. Adds a 2-second [I Frame Interval (sec.)] for IP streaming video.
5. Adds an automatic reconnection feature for RTMP streaming when disconnected.
6. Adds an automatic reconnection feature for SRT streaming when the camera starts up and disconnects.
7. Adds SRT streaming start / stop buttons to the Click Operation Menu.
8. Enables switching the video reception frame rate on the settings page to Normal, Low, or Off.
9. Adds a mode that retains image quality settings within Custom Picture for each preset.
10. Adds a button to reset WB / Color settings and Image Quality Details settings to their default values.
11. Enables turning off the POWER / STATUS Lamp.
12. Adds area selection zoom function.
13. Adds the ability to set the movement speed by Time as a preset.
14. Adds [Preset / CP only] as the restore target in the [Backup / Restore] function.
15. Adds XC command for smoother angle movement with slow deceleration.
16. Adds the ability to set PT [Movement Range] while watching the video.
17. Adds the [One Shot AF].
18. Increases the size of the thumbnail image on mouseover.
19. Enables setting the maximum magnification of digital zoom.
20. Improves security features.
- Adds the ability to review the history of any changes made to the password, network information, or other settings.
21. Enables firmware updates to be performed when the camera is connected to the internet and if new firmware is made available on Canon servers.
Update the firmware from the camera's Settings Page.
For details, refer to the camera's Settings Guide.
<Firmware file>
- crn700-v160.bin
The firmware contains software modules developed by third parties. For details, see "ReadMe-E.txt" in the downloaded file and "ThirdPartySoftware-E.pdf" (third-party software) in the lower part of each folder in the "LICENSE" folder. The license terms for each module are contained in the same folder.
Ver. 1.5.0(Ver. 1.5.0 is not available on the Web. The amendments in Ver. 1.5.0 will be included in Ver. 1.6.0.)
1. Improves security features.
- Adds the ability to review the history of any changes made to the password, network information, or other settings.
2. Enables firmware updates to be performed when the camera is connected to the internet and if new firmware is made available on Canon servers.
Ver. 1.4.1
1. Fixed an issue where externally registered presets were not always saved.
2. Fixed an issue in which the subject was out of focus when the focus position was specified via standard communication from software manufactured by another company. If the focus position specified via standard communication is registered in software from another manufacturer, re-register it after updating the firmware.
Ver. 1.4.0
1. Adds Lite version of the automatic tracking application. Lite version application has basic features of the automatic tracking application.
2. Adds [Canon 709/ BT.709] to the Gamma/ Color Space in Custom Picture Settings.
3. Adds [G Gain] in White Balance in Custom Picture Settings.
4. Adds [CMT709] to LUT and View Assist in Monitoring Settings.
5. Enables the ability to adjust Custom Picture [Black: Master Pedestal], [Black: Master Black Red], [Black: Master Black Blue], and [Black: Master Black Green] more widely.
6. Enables the ability to set Clear Scan Settings in more detail.
7. Adds function for setting a limit on the range of operation of the pan /tilt.
8. Enables the ability to set zoom and focus speeds in more detail.
9. Enables the ability to make [Speed Level] of Preset Setting a finer adjustment at lower speeds.
10. Adds function for selecting SDI output timecode superposition on or off.
11. Displays the Camera Name set by the user at the top of the Settings Page.
12. Increases target bit rate limit when using encryption with SRT protocol.
13. Fixes minor issues.
Ver. 1.3.0
1. Adds support for registering the still thumbnail when a preset memory is registered.
2. Adds support for registering the still thumbnail of the trace start position.
3. Adds function for freeze image during preset moving.
4. Adds Adaptive Bitrate (ABR) function for video delivery over SRT protocol.
5. Adds support for setting up to four output destinations for the free-d protocol.
6. Adds the option "other than network settings and management information" as restore items for the backup/ restore function.
7. Adds Backup/ Restore function for Add-On Applications System settings.
8. Fixed a bug that caused Genlock to not sync when camera startup.
9. Fixes an issue that caused audio noise during RTMP distribution to the video streaming service.
10. Fixes minor issues.
Ver. 1.2.0
1. Adds support for licenses activation tool.
*When the application is ready for release, we will inform you on our website.
2. Add-on applications and licenses are no longer deleted when you switch back to factory settings with the unit RESET switch.
Ver. 1.1.0
1. Adoption of "Add-On Applications System" that extends camera functions by installing paid applications.
Windows 11, Windows 10 64bit
macOS 15, macOS 14
Do not turn off the power to the camera while performing the firmware update.
Turning off the camera at this stage may result in disabling its ability to boot correctly.
1. Download the file to any folder.
2. Extract files from a compressed file (ZIP file).
3. For further instructions, refer to Readme in the decompressed folder.
All software, programs (including but not limited to drivers), files, documents, manuals, instructions or any other materials (collectively, “Content”) are made available on this site on an "as is" basis.
Canon Singapore Pte. Ltd., and its affiliate companies (“Canon”) make no guarantee of any kind with regard to the Content, expressly disclaims all warranties, expressed or implied (including, without limitation, implied warranties of merchantability, fitness for a particular purpose and non-infringement) and shall not be responsible for updating, correcting or supporting the Content.
Canon reserves all relevant title, ownership and intellectual property rights in the Content. You may download and use the Content solely for your personal, non-commercial use and at your own risks. Canon shall not be held liable for any damages whatsoever in connection with the Content, (including, without limitation, indirect, consequential, exemplary or incidental damages).
You shall not distribute, assign, license, sell, rent, broadcast, transmit, publish or transfer the Content to any other party. You shall also not (and shall not let others) reproduce, modify, reformat, disassemble, decompile or otherwise reverse engineer or create derivative works from the Content, in whole or in part.
You agree not to send or bring the Content out of the country/region where you originally obtained it to other countries/regions without any required authorization of the applicable governments and/or in violation of any laws, restrictions and regulations.
By proceeding to downloading the Content, you agree to be bound by the above as well as all laws and regulations applicable to your download and use of the Content.