Solution
In order to start CanoScan Toolbox automatically in Mac OS X 10.3 or 10.2.8 when a scanner button is pressed, you need to set the scanner buttons to work with CanoScan Toolbox first.
IMPORTANT
- Before performing this procedure, make sure that CanoScan Toolbox is installed, and that the scanner is connected to your computer.
1. Open the [Applications] folder in the hard disk and double-click Image Capture. The preview scan automatically starts.
2. Click [Options].
3. Select [CanoScan Toolbox] in [When a scanner button is pressed, open] on the [Settings] screen.
4. Click [OK] and quit Image Capture.
CanoScan Toolbox starts automatically the next time you press a scanner button.
IMPORTANT
- If you see a TWAIN screen when Image Capture is started, do the following to deselect TWAIN software.
1. Select [Preferences] from the [Image Capture] menu.
2. Remove the checkmark from [Use TWAIN software when possible.] on the [Scanner] screen.
3. Click [OK] and quit Image Capture. If you restart Image Capture, the preview scan starts.
1. Open the [Applications] folder in the hard disk and double-click Image Capture. The preview scan automatically starts.
2. Select [Preferences] from the [Image Capture] menu.
3. Select [Other] in [When a scanner button is pressed, open].
4. Select CanoScan Toolbox in the file selection dialog box.
5. Click [Open] and quit Image Capture.
CanoScan Toolbox starts automatically the next time you press a scanner button.