Checking the Operations with Network Status Print
31-Oct-2011
8100080400
Solution
After installing the printer driver, be sure to perform Network Status Print to check the operations using the following procedure. Network Status Print prints the version of the optional network board or the TCP/IP settings.
NOTE
- Network Status Print is designed to be printed on A4 size paper. Load A4 size paper.
- The screenshots used in this section are from Windows XP Professional with which LBP5100 is being used.
1. Display the [Printers and Faxes] folder or the [Printers] folder.
From the [Start] menu, select [Settings] > [Printers].
From the [Start] menu, select [Printers and Faxes].
From the [Start] menu, select [Control Panel], and then click [Printers and Other Hardware] > [Printers and Faxes].
From the [Start] menu, select [Control Panel], and then click [Printer].
2. Right-click the icon for your printer, then select [Printing Preferences] from the pop-up menu.
3. Display the [Page Setup] sheet (1), then click [ 
] (Display Printer Status Window) (2).
] (Display Printer Status Window) (2).
NOTE
For details on the Printer Status Window, see "User's Guide" in the CD-ROM supplied with the printer.
4. From the [Options] menu, select [Utility] > [Network Status Print].
5. Click [OK].
Network Status Print is printed.
IMPORTANT
This is a sample of Network Status Print. The contents may differ from the Network Status Print printed by your printer.
NOTE
If the Network Status Print is not printed properly, see "Chapter 4 Troubleshooting," in Network Guide in the CD-ROM supplied with the printer.