Solution
Follow this procedure to set the machine for receiving faxes.
The default setting is <FaxOnly>.
2. Press [<-] or [+>] to select <FAX SETTINGS>, then press [OK].
3. Press [<-] or [+>] to select <RX MODE>, then press [OK].
4. Press [<-] or [+>] to select the receive mode, then press [OK].
- <FaxOnly>: Answers all calls as faxes.
- <AnsMode>: Receives faxes automatically and records voice messages.
- <NET SWITCH>: Distinguishes between fax and voice calls.
- <FaxTel>: Switches between fax and voice calls automatically if the optional handset or an external telephone is connected to the machine.
- <MANUAL>: Does not answer any calls. You have to manually receive faxes.
NOTE
- For <FaxTel> or <MANUAL>, make sure the optional handset or an external telephone is connected to the machine.
- For <AnsMode>, make sure an answering machine is connected to the machine.
- The <NET SWITCH> mode is available for certain countries only and requires subscription to a network switch service.
5. Press [Stop/Reset] to return to the standby mode.