Fine-Tuning the Paper Feed Amount (Adj. Fine Feed) (iPF6300/iPF6350)
Solution
If the contrast is uneven or banding in different colors appears at 50 mm (2.0 in) intervals in printed documents, try executing "Adj. Fine Feed" during printing to fine-tune the feed amount.
NOTE
- Always execute "Adj. Quality" before "Adj. Fine Feed".
Once you execute "Adj. Quality", the "Adj. Fine Feed" value will revert to 0.
Perform adjustment as follows.
1.On the "Tab Selection screen" of the Control Panel, press 
or 
to select the Settings/Adj. tab (
).
or to select the Settings/Adj. tab ().
NOTE
- If the "Tab Selection screen" is not displayed, press the "Menu" button.
2.Press the "OK" button.
The "Set./Adj. Menu" is displayed.
3.Press 
or 
to select Adj. Fine Feed, and then press the OK button.
or to select Adj. Fine Feed, and then press the OK button.4.Press 
or 
to select a setting value in the range -5 to +5, and then press the OK button.
or to select a setting value in the range -5 to +5, and then press the OK button.The setting is now applied.