Adjusting the Feed Amount (iPF6300/iPF6350)
Solution
If printed documents are affected by the following problems, try adjusting the feed amount.
- Banding in different colors
- Line length is not accurate in the direction paper is fed
To adjust the feed amount, do the following, in this order.
1.Depending on the issue, adjust "Adj. Priority" to suit the particular type of paper.
2.Execute "Adj. Quality" or "Adjust Length", depending on the selection in "Adj. Priority".
3.After executing "Adj. Quality", execute "Adj. Fine Feed" for further adjustment as needed.