Consumer Business
ENG BAHASA INDONESIA
Consumer
Switch to: Business
Support
ENG BAHASA INDONESIA
  1. Support
  2. Search
  3. Download
Contact Us

    How to set High-Speed Continuous Shooting (High-speed Burst) and Group Playback

    06-Feb-2014
    8202001100

    Solution

    How to set High-Speed Continuous Shooting (High-speed Burst)
    You can shoot a series of shots in rapid succession by holding the shutter button all the way down.
    Approx. 10.5 shots/sec. can be taken.

    NOTE
    • The resolution is [ ] (2304 x 1728) and cannot be changed.
    • Focus, image brightness, and color are determined by the first shot.
    • Shooting may stop momentarily or continuous shooting may slow down depending on shooting conditions, camera settings, and the zoom position.
    • As more shots are taken, shooting may slow down.

    1. Set the mode switch to <> and press the power button.

    2. Press the <FUNC./SET> () button.

    3. Press the <><> buttons to choose [Shooting Mode] (If the settings have not been changed [ ] ) will be displayed).
    Press the <FUNC./SET> () button.





    4. Press the <><> buttons to choose [High-Speed Burst] (), and then press the <FUNC./SET> () button.



    5. If the [High-speed Burst] () icon is displayed on the upper-right part of the screen, the setting is completed.



    Hold the shutter button all the way down to shoot continuously.

    Viewing Individual Images in a Group (Group Playback)
    When playing back images, images taken in [High-speed Burst] ( )mode are displayed in a group with only the first image displayed, however, grouped images can also be viewed individually.
    IMPORTANT
    If you erase a grouped image, all the images in the group will also be erased. Be sure to exercise adequate caution.
    REFERENCE
    • To view images taken in [High-speed Burst] () mode as a group, press <MENU> (), and then select [On] for [Group Images] in the [Playback Menu] ( ) tab. (By default, [On] is selected.)

    1. Press the <>< > buttons to choose an image labeled with [ ], and then press the <FUNC./SET> () button.



    2. Press the <>< > buttons to choose [ ], and then press the <FUNC./SET> () button.



    3. Pressing the <>< > buttons will display only images in the group.
    To cancel group playback, press the <FUNC./SET> () button, choose [ ] in the menu, and press the <FUNC./SET> () button again.
    NOTE
    • During group playback, you can use the menu functions accessed by pressing the <FUNC./SET> () button. You can also browse through images quickly "Navigating through Images in an Index" and magnify them "Magnifying Images" . By choosing [All Images in Group] for "Protecting Images", "Erasing Multiple Images at Once", "Adding Images to the Print List (DPOF)" , or "Adding Images to a Photobook", all images in the group can be manipulated at once.
    • To ungroup images so that they are displayed only as single still images, press the <> button, choose [Group Images] on the [ ] tab, and then choose [Off]. However, grouped images cannot be ungrouped during individual playback.