Adjusting Exposure Compensation (PowerShot SX400 IS / PowerShot SX410 IS)
Solution
The standard exposure set by the camera can be adjusted in 1/3-stop increments, in a range of –2 to +2.
IMPORTANT
- In the following example proceure, the camera's shooting mode has been set to [Program AE] (
) mode. - Exposure compensation cannot be adjusted in the shooting modes listed below:
-[Auto] (
), [Poster Effect] (
), [Long Shutter] (
)
), [Poster Effect] (), [Long Shutter] ()1. Press the <Power> button to turn the camera on.
2. Press the [ 
] button.
] button.
3. As you watch the screen, press the [ 
], [ 
] buttons to adjust the brightness.
], [ ] buttons to adjust the brightness.
4. When shooting still images, press the [ 
] button to display the set exposure compensation amount, and then shoot.
] button to display the set exposure compensation amount, and then shoot.
NOTE
- You can also shoot still images with exposure compensation bar displayed.
- While recording a movie, [
] is displayed, and the exposure is locked.