Consumer Business
ENG BAHASA INDONESIA
Consumer
Switch to: Business
Support
ENG BAHASA INDONESIA
  1. Support
  2. Search
  3. Download
Contact Us

    Easily Composing Shots after Manual Zooming (Framing Assist – Lock) (PowerShot SX60 HS)

    01-Oct-2014
    8202184300

    Solution

      You can reduce camera shake at the telephoto end, which makes it easier to compose shots.

      1. Press the <Power> button to turn the camera on.

      2. Zoom out to the telephoto end and press the <> button.



      Press and hold the <> button. [ ] is displayed, and image stabilization optimal for shooting at the telephoto end is applied.
      REFERENCE
      To fine-tune the size of subjects gradually, move the zoom lever while holding down the < > button.

      3. While holding the < > button, press the shutter button halfway to focus on the subject, and then press it all the way down.



      4. Press the shutter button down fully to shoot.
      IMPORTANT
      • The zoom factor cannot be adjusted by pressing the < > button while you are holding down the < > button.
      • Recomposing the shot while holding down the <> button may make image stabilization less effective. In this case, [ ] is displayed in gray. If this occurs, release the <> button, compose the shot, and then press it again.
      • If you start recording a movie while holding down the <> button, image stabilization may cause the shot to be recomposed. Please do not hold down the <> button while shooting movies.
      NOTE
      Although no image stabilization icon is shown while you hold down the <> button, image stabilization optimal for shooting at the telephoto end is applied.