Solution
When Movie Servo AF is set, the camera focuses on the subject continuously during movie shooting.
1. Set the camera's power switch to <ON>.
2. Set the Live View shooting/Movie shooting switch is set to <
![](https://id.canon/media/image/2019/01/24/f2c2df1332534fbe9a2808ba7a326996_G0187034.gif)
>.
3. Press the <MENU> button to display the menu screen.
4. Press the <
![](https://id.canon/media/image/2019/01/24/43b119d087f74e138828592b5283cd3f_G0184286.gif)
> button and select the [
![](https://id.canon/media/image/2019/01/24/8dc5d15607fb46738bfe63d5b8b86f90_G0185044.gif)
] tab.
5. Turn the <
![](https://id.canon/media/image/2019/01/24/1bd3e315df8c45668e78734d8ead0ac0_G0184280.gif)
> dial to select the [
![](https://id.canon/media/image/2019/01/25/464bf7c85cb24520ae28d61ed421bf61_G0190879.gif)
] tab.
6. Turn the <
![](https://id.canon/media/image/2019/01/24/e4db9d7f318c428db240770c4570d282_G0184281.gif)
> dial to select [Movie Servo AF], then press <
![](https://id.canon/media/image/2019/01/24/5032ffb125d446c59ad012fb61b7b1f1_G0186830.gif)
>.
7. Turn the <
![](https://id.canon/media/image/2019/01/24/e4db9d7f318c428db240770c4570d282_G0184281.gif)
> dial to select [Enable], then press <
![](https://id.canon/media/image/2019/01/24/5032ffb125d446c59ad012fb61b7b1f1_G0186830.gif)
>.
NOTE
The default setting is [Enable].
When Movie Servo AF is set to [Enable]
- The camera focuses on the subject continuously even when you are not pressing the shutter button halfway.
- Since this drives the lens continuously, it will consume battery power and shorten the total possible movie shooting time.
- With certain lenses, the lens operation noise during focusing may be recorded. If this happens, use an external microphone (commercially available) to reduce lens operation noise in the movie. Also, using the EF-S18-135mm f/3.5-5.6 IS STM lens will reduce lens operation noise.
- If you want to set the lens’s focus mode switch to <MF> during Movie Servo AF, first set the Live View shooting/Movie shooting switch to <
>.
- If you want to keep the focus at a specific point or you do not want the lens operation noise to be recorded, you can temporarily stop Movie Servo AF as follows. When you stop Movie Servo AF, the AF point will turn gray. When you perform the same steps below, Movie Servo AF will resume.
- Press the <
![](https://id.canon/media/image/2019/01/25/4e4eef9f77fa474dbd580805e619cfbc_G0184264.gif)
> button.
- Under [
![](https://id.canon/media/image/2019/01/24/e7a16eb60f004ac2a19f3d7169c99c13_G0185314.gif)
: Custom controls], if a button is assigned to [AF stop], you can pause the Movie Servo AF while holding down that button. When you let go of the button, Movie Servo AF will resume.
- When Movie Servo AF is paused, if you return to movie shooting after pressing the <MENU> or <
> button, changing the AF method, or performing some other operation, Movie Servo AF will resume automatically.
IMPORTANT
REFERENCE
<Shooting Conditions that Make Focusing Difficult>
- Subject with low-contrast such as the blue sky, solid-color flat surfaces or when highlight or shadow details are lost.
- Subjects in low light.
- Stripes and other patterns where there is contrast only in the horizontal direction.
- Subjects with repetitive patterns (skyscraper windows, computer keyboards, etc.).
- Fine lines and subject outlines.
- Under a light source whose brightness, color, or pattern keeps changing.
- Night scenes or dots of light.
- Under fluorescent or LED lighting when the image flickers.
- Extremely small subjects.
- Subjects at the edge of the picture.
- Subjects strongly reflecting light.
- Near and distant subjects covered by an AF point (such as an animal in a cage).
- Subjects that keep moving within the AF point and cannot keep still due to camera shake or subject blur.
- A subject approaching or moving away from the camera.
- Performing AF while the subject is very far out of focus.
- Soft focus effect is applied with a soft focus lens.
- A special effect filter is used.
- Noise (spots, banding, etc.) appears on the screen during AF.
When Movie Servo AF is set to [Disable]
Press the shutter button halfway or press the <AF-ON> button to focus.