Solution
Displays during shooting (Onscreen Markers)
Using onscreen markers allows you to make sure your subject is correctly framed. The onscreen markers will not affect your recordings.
- Displaying Onscreen Markers
You can display a grid or a horizontal line at the center of the screen. Use the markers, which can be displayed in white or gray, to make sure your subject is framed correctly.
: Horizontal line (level)
: Grid
1. Turn on the camcorder.
2. Press the [MENU] button.
3. Touch [
] Camera Setup menu > [Onscreen Markers].
*In Photo Shooting mode, choose [
] Camera Setup menu.
4. Select the desired option.
5. Touch [
].
6. The horizontal line (level) or grid you selected is displayed on the screen.
* When [Level (White) is selected.
Displays during shooting (Data code)
In the video clip and photo shooting modes, you can select the appropriate option to display the date and/or the time. In photo shooting mode, you can also choose to select [Camera Data] to display the aperture and shutter speed.
1. While the camcorder is turned off, hold the [
] button (
) pressed down. The thumbnails of clips and photos you have recorded are shown in index screens sorted by the type of recording.
2. Touch [MENU] -> [
Playback Setup] -> [Data Code].
3. Touch the desired option.
4. Touch [
].
5. When you play back clips, the data code you selected will be displayed.
* When [Date and Time] has been set.
6. When photos are played back, the selected data code will be displayed.
* When [Time] has been set.
