15-Jan-2015
0400183902
I have read and understood the disclaimer below
and wish to download the designated software
Firmware Version 01.030300 incorporates the following improvements:
1. Improves fan rotation pattern to reduce fan noise when the Projector is in Power Saver Mode.
2. Enables Standby mode to be identified by the Power ON LED indicator flashing at an interval of four seconds.
3. Addresses an issue when the network function set to OFF (default setting). User menu settings are now retained even if the projector is turned OFF immediately after changing the menu setting.
This firmware update is for the above-listed projectors running a firmware version that is earlier than Version 01.030300. If the firmware version of the projector is already Version 01.030300, there is no need to update the firmware. After the firmware update, it is possible to restore the projector to a previous firmware version. For customers who wish to restore the projector to a previous firmware version, please contact your local service center.
How to Download and Install the Firmware:
If you wish to perform the firmware update, please download the firmware and the firmware update procedure guide from our Web site.
For further details on the item 2 above, please refer to the latest version of the instruction manual for this product, which will be released at the same time as this firmware update. Download the new version of the Instruction Manual for the Projectors.
Target Models and New Firmware Version:
WUX450: Version 01.030300
WX520: Version 01.030300
WUX400ST: Version 01.030300
WX450ST: Version 01.030300
Firmware version confirmation method:
You can confirm the firmware version by following the steps below.
1. Project a blank screen.
2. Press the MENU button on the Side Control (or on the remote control) of the projector to display the menu screen.
3. Use the right pointer button to go to the [Information] tab.
4. Check the firmware version.
Regarding the Software Included in this Firmware
The software included in this firmware is comprised of software modules developed by both Canon and third parties.
Software Developed by Canon and Free Software:
Software developed or created by Canon and accompanying document is protected by copyright law, terms of an international convention and any other governing laws.
This product uses software modules under copyright by third parties and distributed as free software. Some of these software modules are subject to the GNU General Public License v2 (GPL), GNU Lesser General Public License v2.1 (LGPL) or any other license.
Display of License Information of Free Software Modules Included in this Firmware
The license information required to be displayed for the free software modules included with this firmware is saved in the download file. If you want to check the license list, please see the ThirdPartySoftware.pdf file in the thirdparty_software\LICENSE folder. Furthermore, if you want to check the license for each of the free software modules, please see the text file stored in the thirdparty_software\LICENSE folder.
Obtaining Source Codes of Free Software:
Some free software modules require the acquisition of the source code in order to distribute the executable form of those software modules. To obtain the source code for the software modules, please contact the Canon Regional Headquarters for your country of residence.
All software, programs (including but not limited to drivers), files, documents, manuals, instructions or any other materials (collectively, “Content”) are made available on this site on an "as is" basis.
Canon Singapore Pte. Ltd., and its affiliate companies (“Canon”) make no guarantee of any kind with regard to the Content, expressly disclaims all warranties, expressed or implied (including, without limitation, implied warranties of merchantability, fitness for a particular purpose and non-infringement) and shall not be responsible for updating, correcting or supporting the Content.
Canon reserves all relevant title, ownership and intellectual property rights in the Content. You may download and use the Content solely for your personal, non-commercial use and at your own risks. Canon shall not be held liable for any damages whatsoever in connection with the Content, (including, without limitation, indirect, consequential, exemplary or incidental damages).
You shall not distribute, assign, license, sell, rent, broadcast, transmit, publish or transfer the Content to any other party. You shall also not (and shall not let others) reproduce, modify, reformat, disassemble, decompile or otherwise reverse engineer or create derivative works from the Content, in whole or in part.
You agree not to send or bring the Content out of the country/region where you originally obtained it to other countries/regions without any required authorization of the applicable governments and/or in violation of any laws, restrictions and regulations.
By proceeding to downloading the Content, you agree to be bound by the above as well as all laws and regulations applicable to your download and use of the Content.