Prepare the Machine
16-Apr-2008
8200169100
Solution
IMPORTANT
When moving the machine, carry the machine at both ends as shown below. Do not lift the machine by grasping the Paper Support Extension.
1. Place the machine on a flat and horizontal surface, and do not place any objects in front of the machine.Remove all the shipping tapes and protective material on the outside of the machine.Then open the Paper Output Tray.
2. Lift the Scanning Unit (Printer Cover)(A), and pull the Scanning Unit Support down into place.
3. Remove the protective material(B) on the right side.
CAUTION
Before turning on the machine, remove all of the shipping tapes.
4. Lift the Scanning Unit (Printer Cover) slightly to set the Scanning Unit Support back to its original position, and then gently close the Scanning Unit (Printer Cover).
5. Plug the power cord(C) in the back of the machine and connect the other end to the wall outlet.
IMPORTANT
Make sure that the Document Cover(D) is closed.
NOTE
Do NOT connect the USB cable at this stage.
6. Press the ON/OFF button to turn on the machine. The machine will initialize. Wait until the Power lamp stops flashing and remains lit green.
7. Use the 
or 
button on the Operation Panel to select the language for the LCD, then press the OK button.
or button on the Operation Panel to select the language for the LCD, then press the OK button.
IMPORTANT
If an unintended language is displayed on the LCD, press the Back button to return to the LANGUAGE SETTING screen.
Once the message “SET INK CARTRIDGE” appears, go to 8.
8. Lift the Scanning Unit (Printer Cover), and pull the Scanning Unit Support down into place. The FINE Cartridge Holder automatically moves to the left.
9. Write down the serial number(E) located inside the machine. You will need this to register your product.
1. Remove the Black FINE Cartridge from its box.
2. Remove the protective tape(A) gently.
IMPORTANT
- Do not touch the electrical contacts(B) or Print Head Nozzles(C) on a FINE Cartridge. The machine may not print out properly if you touch it.
- Do not reattach the protective tape once you have removed it.
- Be careful not to stain your hands or surrounding work area with ink on the removed protective tape.
3. Insert the Black FINE Cartridge slightly slanted into the left slot 
.
.
4. Push up the FINE Cartridge until it clicks into place.
IMPORTANT
For correct machine operation, make sure the FINE Cartridge is securely inserted.
5. Repeat the procedure for the Color FINE Cartridge, inserting it into the right slot 
.
.
6. Lift the Scanning Unit (Printer Cover) slightly to set the Scanning Unit Support back to its original position, and then gently close the Scanning Unit (Printer Cover).
IMPORTANT
Once you have installed the FINE Cartridges, the message “CART. RETURN” is dis-played on the LCD. Wait until the following message appears before proceeding. It takes about one to two minutes.
Hardware setup is complete.