Solution
2 on 1 combination automatically reduces two documents to fit on the selected paper size. This feature can be used with both [Collate Copy] and [Two-Sided Copying].
1. Set documents.
Place the first page on the platen glass if you are not using the ADF.
2. Press [COPY].
3. Press [Collate/2 on 1] repeatedly to select [2 ON 1], then press [OK].
If you want to use [2 ON 1] with [Collate Copy] at the same time, select [COLLATE+2 ON 1], then press [OK].
4. Use the numeric keys to enter the desired copy quantity (1 to 99).
5. Press [Start].
When you set the document on the platen glass, press [Start] for each document. When scanning is complete, press [OK].
NOTE:
NOTE
a. If you press [OK] without scanning the second document, only the first document will be printed on the left side of the paper.
b. A maximum of 4 mm margin will be produced between the two reduced documents in 2 on 1 combination copying.
c. To cancel all settings, press [Stop/Reset].
d. When you switch the mode by pressing the mode keys such as [SEND/FAX], all settings will be also canceled.