The message <11 NO "size" PAPER> appears in the display on the control panel.
18-Jul-2012
8201606000
Issue
The following are probable causes when the message <11 NO "size" PAPER> appears in the display on the control panel. Follow the described instructions.
Cause and Solution
Cause:
Paper of the size specified in the application is not loaded in the paper source (in all the paper sources when PAPER SOURCE is set to AUTO; in the specified paper source when the setting is fixed).
Remedy 1:
Refill or load paper.
Remedy 2:
Press the 
(Feeder Selection) key, then select other paper source for the same paper size or larger paper size.
(Feeder Selection) key, then select other paper source for the same paper size or larger paper size.See Related Information about the following title(s) at the end of this page as needed.
- How to load paper in Cassette
- How to load paper (other than envelopes) in the multi-purpose tray
- How to load envelopes in the multi-purpose tray
- How to load custom size paper (non-standard size paper) in the paper cassette
- How to load custom size paper (non-standard size paper) in the multi-purpose tray