How to change Control Ring functions (PowerShot S200)

Last Updated : 22-Aug-2013
Issue Number : 8201888200

Solution

Reassign <Control Ring> functions as follows.

1. Turn on the camera.

2. Choose a function to assign to the <

> ring.

Press the <

> button and choose　[

] tab > [Set Control Ring Func.], and then press the <FUNC./SET> button (

)

Press the <

><

> <Directional buttons>, turn the <Control Ring> (

) or the <Control Dial> (

) to choose the desired option.

3. Turn the <Control Ring> (

) or the <Control Dial> (

) to configure the assigned function.

Functions Assignable to the Control Ring

Functions you can assign to the control ring vary depending on shooting mode, and those assignments determine which functions you can assign to the control dial.

Item	Shooting Mode
Item
STD	Av	Av	Tv	Step Zoom
STD	Tv	-	-	-
	ISO	ISO	ISO	ISO
	Tv, Av ^*	Av	Tv	-
	Tv	+/–	+/–	+/–
	Av	Av	Tv	-
	Manual focusing is possible
	Step zooming is possible
	The aspect ratio can be changed

+/–: exposure compensation; ISO: ISO speed; MF: manual focus; Tv: shutter speed; Av: aperture value.
When you assign [Manual Focus] (), [Step Zoom] (), or [Aspect Ratio] () to the <Control Ring> (), the functions you can assign to the <Control Dial> are the same as for [ ].

* Tv and Av settings can be toggled by pressing the <

> button.

NOTE

In shooting modes other than these (except [Creative Filter Mode] (

) ), the <Control Ring> (

) can be used for step zooming.