Changing the Aspect Ratio (PowerShot S120)
22-Aug-2013
8201919000
Solution
You can change the image aspect ratio (ratio of width to height).
 | Used for display on widescreen HDTVs or similar display devices. |
 | Same aspect ratio as 35mm film, used for printing images at 5 x 7-inch or postcard sizes. |
 | Native aspect ratio of the camera screen, also used for display on standard definition televisions or similar display devices, or for printing images at 3.5 x 5-inch or A-series sizes. |
 | Square aspect ratio. |
 | Aspect ratio commonly used for portraits. |
NOTE
- Not available in [
] mode.
1. Press the power button to turn the camera on.
2. Press the <FUNC./SET> (
) button.
) button.3. The following screen appears.
Press the <
><
> buttons to choose [Still Image Aspect Ratio].
Press the <
><
> buttons to choose the desired aspect ratio, and then press the <FUNC./SET> () button to complete the setting procedure.- When the following shooting modes are selected, the aspect ratio cannot be changed, or limited aspect ratios are available.
>*1,
<>,
<
>,
<
>,
<
>,
<
>,
<
>,
<
>*2,
<
>,
<
>,
<
>,
<
>,
<
>
*1... Options vary depending on the shooting mode.
*2...[4:3] or [16:9] can be selected.