Adding a Date Stamp when Shooting

Last Updated : 04-Mar-2014
Issue Number : 8202003300

The camera can add the shooting date to images, in the lower-right corner.

IMPORTANT

Note that date stamps cannot be edited or removed, so confirm beforehand that the date and time are correct.

The position and shape of the operation buttons, screens displayed, and setting items may differ according to the model you use.

REFERENCE

For setting or changing the date and time, please click here.
In some shooting modes it may not be possible to configure the [Date Stamp] setting.

For a list of the shooting modes in which [Date Stamp] setting configuration is possible, please refer to the table below.

The procedure for adding a date stamp to images during shooting is explained below.

1. Press the <Power> button to turn the camera on.

2. Press the <

> button, and then choose the [Shooting] (

) tab.

3. Press the <

><

> buttons to choose [Date Stamp], , and then press the <

><

> buttons to choose [Date] or [Date & Time].

Press the <

> button.

4. When [Date Stamp] is set to [Date] or [Date & Time], [

] is displayed on the LCD monitor.

If [

] does not appear, press the <DISP.> button several times to change the information displayed on the screen.

5. The [Date Stamp] will be added to the images as shown below:

[Date]

[Date & Time]

NOTE

It is not possible to edit the displayed date, color, style, or position of date stamps.

Date Stamps can be added to images in the shooting modes shown in the table below.

Model	Shooting Modes in which Date Stamps can be added
PowerShot G1 X Mark II	, , , , , , , , , , , ,
PowerShot N100	, , , , , , , , ,
PowerShot SX700	, , , , , , , , , , , , ,
PowerShot SX600 HS PowerShot ELPH 340 HS / IXUS 265 HS	, , , , , , , , ,
PowerShot ELPH 150 IS / IXUS 155 PowerShot ELPH 135 / IXUS 145	, , , , , , ,