How to set Continuous Shooting (PowerShot N100)

Last Updated : 17-Mar-2014
Issue Number : 8202065000

Solution

You can hold the shutter button all the way down to shoot continuously.

IMPORTANT

The following section explains the setting procedures when the camera’s shooting mode has been set to [ ]
During continuous shooting, focus and exposure are locked at the position/level determined when you pressed the shutter button halfway.
Cannot be used with the self-timer.
Shooting may stop momentarily or continuous shooting may slow down depending on shooting conditions, camera settings, and the zoom position.
As more shots are taken, shooting may slow down.
Shooting may slow down if the flash fires.
Multi-area White Balance is not available. Similarly, [Hg Lamp Corr.] is set to [Off] and cannot be changed.
With Touch Shutter, the camera shoots continuously while you touch the screen.

NOTE

Continuous shooting cannot be set in the following modes:

,

REFERENCE

Continuous Shooting Speed: Approx. 3 shots/sec.*

*Based on Canon testing standards, using a 8 GB UHS-I memory card. Note that the number of shots varies depending on subjects, the brand of memory card, and other factors.

1. Press the power button to turn the camera on.

2. Press the <FUNC./SET> (

) button.