Consumer Business
ENG BAHASA INDONESIA
Consumer
Switch to: Business
Support
ENG BAHASA INDONESIA
  1. Support
  2. Search
  3. Download
Contact Us

    Playing back the scene you want to see (XC10)

    22-Apr-2015
    8202609200

    Solution

      The following section describes how to play back scenes you captured.

      1. While the camcorder is turned off, hold the [ ] button () pressed down. The thumbnails of clips and photos you have recorded are shown in index screens sorted by the type of recording.



      • The HD movie index of the SD card is displayed.



      • Press and hold the [ ] button again to set the camcorder to shooting mode.

      2. The index screen appears.
      2-1. Touch [ ].



      2-2. Touch the desired index screen from the list.



      • The index screen you selected from the list will be displayed.



      4K Movie4K clips recorded on the CFast card
      HD MovieHD clips recorded on the SD card.
      PhotoPhotos recorded on the SD card.

      3. Touch a clip.



      • Playback begins.
      • Playback will start from the selected clip until the end of the last clip in the index screen.
      • During playback, you can touch the screen or press the [ ] button to display the playback controls. You can use the touch panel or joystick to operate the playback controls.
      Touch [ ] to stop playback and return to the index screen.

      CAUTION
      • Observe the following precautions while the ACCESS indicator is on or flashing. Failure to do so may result in permanent data loss.
      - Do not disconnect the power source or turn off the camcorder.
      - Do not open the recording media slot cover.
      NOTE
      • You may notice brief stops in video or audio playback between clips.
      • The following photos may not be displayed correctly.
      -Photos not recorded with this camcorder.
      -Photos created or edited on a computer.
      -Photos whose file names have been changed.