The effects of [High ISO speed noise reduction] on the number of possible shots for the maximum burst during continuous shooting (EOS REBEL T5i/EOS 700D)

    11-Dec-2015
    8202650100

    Solution

      If the maximum burst is lower than the normal number, and the camera stops continuous shooting in mid-course, check the [High ISO Speed Noise Reduction] for custom function setting.

      If [High ISO Speed Noise Reduction] is set to [High] or [Multi Shot Noise Reduction], the number of continuous shots (maximum burst) will be lower. To reset the maximum burst to normal, select either [Standard], [Low], or [Disable] for [High ISO Speed Noise Reduction].
      IMPORTANT
      When the [High ISO Speed Noise Reduction] setting is enabled, more time is required to process noise reduction. As a result, it will take longer to temporarily save data in the storage space, and the camera is more likely to be interrupted during continuous shooting.

      1. To change the [High ISO Speed Noise Reduction] setting, display the menu screen and choose [High ISO speed NR] on the [ ] tab then press < >.



      2. The [High ISO speed NR] screen will appear, select either [Standard], [Low], or [Disable] for [High ISO Speed Noise Reduction].
      For more information, please refer to the camera's instruction manual.